904
Dyna ‘S’ Hi-Performance
Ignition System is com-
pletely self contained, fits
behind ignition cover,
uses magnetic rotor with
the original spark
advancer so factory
advance curve is main-
tained. Improves perform-
ance, extends spark plug life, eliminates points and condensers.
Great for dual plugged heads, on 1980-up use advance mecha-
Dyna ‘S’ Single Fire Ignition has the features of the Dyna ’S’,
but fires front and rear cylinders independently of each other
which allows accurate timing of each cylinder. Stock ignition
systems fire both cylinders at the same time which has the
wasted sparks on the exhaust stroke. This eliminates this inher-
ent problem. For use with either dual or single plug heads. On
1980-up models, use VT No. 32-7510 Advance assembly.
Dyna Electric Tach Adapter Kit
must be used with Dyna ‘S’ single
fire ignition is installed on any twins
with dual plugs when electric tach is
Dyna Coils. 35,000 volt! Works with all points ignitions, after-
market or factory electronic ignitions.
VT No. Volt Ohm #
Dyna Type
U/M
DC-1 Angle, Dual Pair
DC-2 Angle, Dual Pair
Use 2 for dual plug heads
32-7792 12V 3 C electro DC-6 Stock, Dual Each
32-7793*12V 5 C points DC-7 Stock, Dual Each
DC-3 Angle, Single Pair
DC-8 Angle, Dual Pair
DC-10-1 Angle, Single Pair
*Note: Use 2 for single fire ignition.
Replacement Rotor for Dyna Ignitions.
VT No. Fits
Dyna S Performance Ignition Systems.
Available in dual or single fire for street appli-
cations only. Each kit includes sensor plate
assembly and correct coil for each applica-
tion. Single plug only. 1980-up applications
VT No. #
Type
Ignition
K. V. Recommends the following coils for Dyna Ignitions:
Street, Single plugs use DC-7 or DC-8
Race, Single plugs use DC-1 or DC-6
Street/Race Dual plugs use 2 DC-2 or DC-5, wired in series
Race, Single plugs use 2 DC-3
Street, Dual plugs use 2 DC-7 or DC-8
Race, Dual plugs use 2 DC-1 or 2 DC-6
Street, Single plug uses 2 DC10-1
C
C
B
A
Electronic Ignition Conversion Kit replaces 32592-78, to
replace points & early electronic ignitions for 1970-79 XL models.
Ignition Sensor Plate Assembly.
VT No. OEM
Fits
32-0508 32466-98 1998-up XL Std, Hugger 883
32-0507 32465-98 1998-up XL 1200 Custom
Dyna 2000 TC for 2004-
07 Sportster models.
Features programmable
advance curves, rev. lim-
iter, LED diagnostic lam
for static timing, plugs into
stock harness and bolts
to stock module location.
Single Fire: Just the spark plug for the piston that is in its compression stroke
will be fired. The other piston, being in its overlap position will not be ignited.
Dual Fire: Both spark plugs are fired simultaneously at the time only one piston
is in its compression stroke.
This is the way the stock motor works.
Single Plug: One spark plug in each head. Total of 2 spark plugs in one engine.
Dual Plug: Two spark plugs in each head. Total of 4 spark plugs in one engine
.
