1242
Oil Pump Drill Fixture allows drilling of
cases to accept late model stock or S&S
oil pumps.
Oil Pump Drill Jig replaces 94461-81 for
installation of factory type updated pump
VT No. 12-9900 on 1973-78 crank cases.
Tappet Oil Screen Plug Tool. Wide slot
type to remove stock slotted plug without
removing exhaust pipes.
VT No. Brand
Oil Pump Snap Ring
Installer makes it
easy to install outer
snap ring on oil pump
shaft, without stretch-
ing the ring. Just apply oil to ring
expander, holder up to the big end of ring
expander, hold up to the end of the shaft,
then push ring onto the shaft with sleeve.
Use on Big Twin Oil Pumps.
Oil Pump Seal Installer easily installs oil
pump seal perfectly below gear surface for
no leak fit.
Sifton Oil
Pump
Check Ball
Reseater
will recut the
seat to allow
the ball to sit properly to prevent sumping
for BT and XL aluminum and cast iron
pumps.
Oil Pressure Switch
Wrench installs and
removes oil pressure
switches without
damage to the
switch, the extension
handle is not used when servicing
Sportsters used on 1340cc Evo, and late
1983-84. Sportster replaces 34816.
Sifton Oil
Pump Pressure
Relief Plunger
Tool is
designed to
safely remove
the pressure
relief plunger
from oil pump
without damag-
ing the oil pump
bore. Can also
be used in prim-
ing of the oil system before startup. Use
on all Big Twins with aluminum type oil
pump.
Wiring Tools
Deutsch Terminal Crimping Tool is
designed to correctly crimp Deutsch
Connectors. Replaces 39965.
14-18mm Spark Plug Hole Thread
Chaser renews damaged threads 13/16.
Removes carbon and corrosion with a few
turns. Allows firm seating of plugs.
Assures metal to metal contact for effec-
tive heat transfer.
Spark Plug Wire Tool
strips 7 and 8 mm igni-
tion wire, crimps spark
plug and distributor ter-
minals.
Wire Terminal
Tool crimps fac-
tory style wire
end.
Wire Terminal Tool
replaces 97362-71,
depresses terminal lock
tabs in disassembly of
factory wiring harness.
Volt Meter reads 8-
16 volts on a 48
mm diameter face.
Terminal Crimper is used for the new
smaller multi lock terminals.
VT No. OEM Fits
16-1293 44695 01-up model w/fuel gauge
Oil Pump
