1237
Evo Cylinder Tools allow installation of
stud to correct height or removal by lock-
ing to stud.
VT No. Item
Cylinder Jig Assembly use to repair
stripped damaged cylinder base threads
up to a 4" bore, in engine case. This will
hold centerline and squareness to where
the factory intended them to be. All this
with the engine still in the frame using an
angle head drill (drill not included). Use on
all 1984-99 Big Twin Evo and 1986-up XL.
Exhaust Stud Drill Fixture fits 1984-up
Ex BT & XL ports to align for drilling of
broken exhaust stud.
Sifton Dowel Guide Plate is precision
drilled to press cylinder dowels in straight
on 1984-up BT and XL models.
Head Bolt Torque Gauge for all Evos.
This accurate gauge allows the measur-
ing of 90° when tightening Evo head
bolts. Torquing sequence lasered on
gauge. Use on al 1984-up Evo models.
Cylinder
Cylinder De-Glazer feature spring action
on the stones keep the stones against the
cylinder wall at the correct pressure.
Capacity 2" to 5
1
/
2
".
16-1759 Set of 3 replacement stones
220 medium grit
SPI Hole Micrometers are
used to determine cylinder
bore size (2.80-3.20)
Piston Ring Grinder accurately sizes end
gap on any piston ring by rotary filing.
VT No. Item
Piston Ring
Installer with
Safety Stop
insert ring ends
in jaws, then
expand gently
and slip over piston into groove. A simple
time saving tool. Wedge jaw handles 3/64"
to 1/4". Also removes rings without dam-
Multi-Blade Groove Cleaner offers a 1-
piece blade arrangement for 1/16", 5/64",
3/32", 1/8" & 3/16" groove widths. Available
for pistons 2 to 5 inches in diameter. VT
Crankshaft Stabilizer Bracket acts as
third hand. Sliding over crank splines, and
bolting to a primary mount hole prevents
crank from turning while installing pistons,
cylinders or rings.
Ring-O-Matic Ring Compressor has pli-
ers which incorporate precision locking
action for exact holding and quick release.
Includes pliers and 6 bands, size range
from 2 7/8" thru 4 3/8". Complete kit.
Jims Piston Pin Support Plate provides
a non-marring flat support to push the
bottom of the piston against as rings and
cylinder are installed over piston. Use on
all 1936-up Twins.
Piston
Jims TC-88 Piston Pin Alignment Tool
use on all TC-88 A or B motors with .927"
diameter wrist pins.
