78
Rear Sprockets
Chrome Lazer Design
Rear Sprockets with
9.8mm offset for 1973-84
FX-FL or flat.
Offset Flat Teeth
Chrome 5-Spoke Sprockets. Offset models have 9.8mm offset.
Offset Flat
Teeth
1973-99
2000-up
Pulley Spacers provide offset when required, with 7/16" bolt
holes. Each disc measures 2 1/16" I.D. with 4 5/16" O.D. For
1980-99.
VT No. Thick Material
*Note: Use when installing flat rotor on 1973-75 Big Twin.
2000-up Rear Pulley-Disc Spacers with 2.25" I.D. Sold as
each.
VT No. Thick
Note: Offset is measured from sprocket bolt mount surface to
center line of teeth as shown.
9.8mm
Offset
*Note: To use on 1994-up
models, Drive Spr
oc
ket
Spacer & Seal
must be
changed to Pre-94 type.
Seal: Replaces 12050 VT No.
33334-84 VT No.
Offset Sprocket Kit for FXST and FXR. Allows installation of
150 series tire by converting from belt to chain drive on 1986-
99 FXST and 1985-94 FXR models. The stock final drive ratio
is 2.1875 with belt drive and then new drive ratio will be 2.125
when used with 24 tooth front sprocket and 51 tooth rear
sprocket and 2.00 when used with a 48 tooth rear sprocket.
VT No. Item
Teeth
21T
22T
23T
23T
24T
24T
48T
51T
48T
51T
Offset Transmission Sprockets fit 1994-2003 Big Twin for
chain drive conversion.
.900 offset is the maximum offset without any modification to
the stock inner primary, to allow the installation of a 180 tire,
without transmission offset. Fender modification may be
required.
.250"
.810"
.900"
Teeth
—
—
21
—
22
Rear Chain Tensioner by LBV reduces
chain vibration and frequency of adjustment
by utilizing a durable urethane roller which
revolves on sealed bearings mounted on
stainless anchor plates.
VT No. Year
Model
FXST
Trans Sprockets
